FAQ

How do I know if my radon system is working?

Direct answer

Read the manometer on the pipe: liquid offset from level means the fan is pulling, liquid sitting level means it is not. Check that the fan runs and the breaker is on, and retest every two years, because a gauge proves suction, not air quality.

More detail

The U-tube manometer is the system's one instrument, and it was marked or recorded at startup. Compare today's reading against that baseline: a large drift in either direction is worth a call, since falling suction suggests a tired fan or a new leak, while a sharp rise can mean the pipe or pit has partially blocked. After any power outage, confirm the fan restarted; after any sump pump service, confirm the lid got resealed, which is the single most common cause of a quiet system creeping back up in this metro. The distinction the gauge cannot make is between moving air and clean air, a fan can pull steadily while a renovation has opened a path the design never covered, so the two-year retest rhythm stays even on a healthy system. A monitor-style continuous radon detector on the lowest level, consumer-grade, is a reasonable supplement between tests. When something looks off, the repair service covers fans, gauges, and seals, and recurrence causes lists the usual suspects.

Authoritative sources

Ready to get started?

Testing and mitigation across the Kansas City metro, from Lee's Summit to Lenexa. Mon-Sat 8am-7pm.

Call (816) 476-2381Text us

Prefer to text? Open your texting app