FAQ

Why is my radon fan making noise?

Direct answer

A new hum or whine usually means worn bearings, a rattle means a loose mount or coupling, and a gurgle means condensation pooling in the pipe. None is dangerous, but a failing fan should be replaced before it quits.

More detail

Kansas City winters make condensation the most common noise here: warm, humid soil gas climbing a pipe through a cold attic or up an exterior wall condenses, and if the run has a sag or a long horizontal stretch, the water pools where the airflow has to fight through it, which gurgles. The cure is pitch, every run draining back toward the suction point, and in stubborn exterior runs, insulation or a condensation bypass. Bearing whine builds over months and marks a fan near the end of its service life; swapping it is a routine visit, not a redesign. Rattles trace to mounts and couplings that vibration has loosened, a five-minute fix that also protects the framing from transmitted hum. A fan that was always audible indoors points at the original design, since fans belong in attics, garages without rooms above, or outdoors, never in the living space. Our repair service handles all three noises, and the winter maintenance post covers prevention.

Authoritative sources

Ready to get started?

Testing and mitigation across the Kansas City metro, from Lee's Summit to Lenexa. Mon-Sat 8am-7pm.

Call (816) 476-2381Text us

Prefer to text? Open your texting app