Yes, at the margins. A basement furnace circulates lowest-level air through the house, and exhaust appliances, dryers, range hoods, bath fans, lower indoor pressure and pull harder on the soil. Good mitigation design accounts for both.
More detail
The HVAC interactions worth knowing in a metro of basement mechanicals: leaky return ducts in the basement inhale the house's highest-radon air and deliver it upstairs, so sealing accessible return leaks helps air quality beyond radon; a continuously running air handler changes the house's mixing and can mask or spread a basement problem depending on the layout; and the subtraction appliances, big range hoods especially, depressurize a tight house measurably. During any short-term test the rule is normal operation, heat or cooling cycling as usual, no whole-house fan. During mitigation design, the assessment notes natural-draft gas appliances, because a strong suction system and a water heater flue compete for basement air, and a backdraft check after startup is proper practice wherever open-combustion appliances share the space; most newer metro homes with sealed-combustion furnaces sidestep the issue. After a furnace replacement or duct overhaul, retest, since the pressure picture that fed your last number has changed. See retesting triggers and system design.