FAQ

What does a radon system cost to run?

Direct answer

A modest, continuous electric draw plus some conditioned-air loss, typically a few dollars a month on a metro electric bill. The fan runs around the clock by design; switching it off to save money defeats the system.

More detail

The electric math is checkable from the fan label: common radon fans draw in the range of a few tens of watts to over a hundred depending on the model, and watts times hours times your utility's rate per kilowatt-hour gives the monthly figure. The quieter cost is thermal. Any sub-slab system moves some heated basement air down through slab leaks and out the stack, which is why the sealing scope, floor-wall joint, cracks, sump lid, is an energy measure as much as a radon measure; a tightly sealed install pays part of its own operating cost every winter. When comparing quotes, ask which fan model each assumes, since an oversized fan on a tight slab wastes watts for no additional reduction, and a right-sized fan chosen after a communication test usually runs cheaper and quieter. The EPA is explicit that systems work only while running continuously, so the manometer, not the switch, is the thing to check monthly. See is my system working.

Authoritative sources

Ready to get started?

Testing and mitigation across the Kansas City metro, from Lee's Summit to Lenexa. Mon-Sat 8am-7pm.

Call (816) 476-2381Text us

Prefer to text? Open your texting app