the Kansas City metro on both sides of the state line

Radon Mitigation Systems in Lee's Summit, MO

Active sub-slab and sub-membrane systems for Kansas City basements, slabs, and crawls, built to ANSI/AARST SGM-SF-2023 on both sides of the state line.

Kansas City Radon Pros trust signals

Radon Mitigation Systems in Lee's Summit

About Lee's SummitMostly 1990s and newer poured basements, often finished. Some homes carry a builder's passive pipe; test after move-in and activate it with a fan if the result is 4 or higher.

Fan-driven sub-slab and sub-membrane systems designed for the foundation in front of you: a shirtwaist-era stone basement in Brookside, a Prairie Village block basement with a sump, a Johnson County poured walkout, or a ranch that mixes all three. Installs follow ANSI/AARST SGM-SF-2023 everywhere in the metro; on the Kansas side the mitigation technician holds KDHE certification under K.S.A. 48-16a01 et seq., and on the Missouri side the credential behind the work is a current NRPP or NRSB certification you can verify yourself. Every system ends with a post-install retest. Lee's Summit sits within our service area for the Kansas City metro on both sides of the state line, with same-week scheduling typical for routine jobs.

Typical pricing in Lee's Summit

$1,200-$2,500

Pricing varies by job specifics. Free phone or on-site quotes; fixed pricing once the technician has assessed the job.

Radon Mitigation Systems in Lee's Summit: a fast-growing Jackson County suburb dominated by 1990s and newer subdivisions foundations and black shale and limestone geology

Most of Lee's Summit was built after 1990 on poured full basements, many of them finished or waiting to be finished, which is where radon exposure concentrates because people sleep and work down there. Some builders roughed in a passive radon pipe from the sub-slab gravel to the roof; a test after move-in decides whether it needs a fan, and the EPA advises testing every new home regardless of what the builder installed. Missouri has no state radon licensing program, so verify a current NRPP or NRSB certification before hiring here. Lee's Summit sits on alternating Pennsylvanian limestone and thin uranium-rich black shale, under residual red clay soils that hold radium weathered out of the rock. Jackson County is EPA Zone 1, the highest radon potential rating.

Many installs in Lee's Summit begin from something already in the house: a builder's passive stack or a sump in a poured basement. When a passive pipe runs from the slab to the roof, an inline attic fan plus a gauge can be the whole job, provided a diagnostic shows the gravel under the floor carries suction well. With no rough-in, the pipe often rises from an unfinished storage room through the garage, keeping it out of the finished space.

Missouri sets no state rules for radon mitigation, so ANSI/AARST SGM-SF-2023, the consensus standard for existing homes, is the benchmark to hold any installer to. The Missouri DHSS radon program oversees radon program compliance for Lee's Summit, and Missouri has no state radon licensing program, so hire on national credentials: look for a current NRPP or NRSB certification number and verify it in that registry.

County
Jackson, MO
Geology
Pennsylvanian black shale and limestone, residual red clay
EPA action level
4.0 pCi/L on long-term average
Service category
Mitigation

Lee's Summit at a glance

County
Jackson, MO
Coverage
Same-week scheduling

Authoritative sources

Ready to get started?

Testing and mitigation across the Kansas City metro, from Lee's Summit to Lenexa. Mon-Sat 8am-7pm.

Call (816) 476-2381Text us

Prefer to text? Open your texting app