Radon Mitigation Systems in Shawnee
Fan-driven sub-slab and sub-membrane systems designed for the foundation in front of you: a shirtwaist-era stone basement in Brookside, a Prairie Village block basement with a sump, a Johnson County poured walkout, or a ranch that mixes all three. Installs follow ANSI/AARST SGM-SF-2023 everywhere in the metro; on the Kansas side the mitigation technician holds KDHE certification under K.S.A. 48-16a01 et seq., and on the Missouri side the credential behind the work is a current NRPP or NRSB certification you can verify yourself. Every system ends with a post-install retest. Shawnee sits within our service area for the Kansas City metro on both sides of the state line, with same-week scheduling typical for routine jobs.
Typical pricing in Shawnee
$1,200-$2,500
Pricing varies by job specifics. Free phone or on-site quotes; fixed pricing once the technician has assessed the job.
Radon Mitigation Systems in Shawnee: a west-metro suburb mixing an old downtown with 1960s to 2010s subdivisions foundations and black shale and limestone geology
Shawnee spreads west from an old downtown into decades of subdivisions, so a single street can hold a 1960s ranch on block, a 1980s split-level over a crawl-and-basement mix, and a 2000s two-story on poured walls. The limestone-and-shale bench terrain that gives western Shawnee its views also means rock sits near the surface on some lots, which changes sub-slab communication and occasionally the suction-point count. Johnson County averages 5.3 pCi/L in the K-State data and is EPA Zone 1, and Kansas requires KDHE certification for the technicians on both the test and the fix. Shawnee sits on alternating Pennsylvanian limestone and thin uranium-rich black shale, under residual red clay soils that hold radium weathered out of the rock. Johnson County is EPA Zone 1, the highest radon potential rating.
Shawnee installs vary by street. A 1960s ranch on block takes one point with block sealing; a 1980s split-level may need suction below the lower slab and a sheet over a crawl; a 2000s two-story often has a sump or rough-in. On the western bench, where rock sits shallow, a test hole before coring helps decide how many suction points the floor needs.
Kansas mitigation is done by KDHE-certified technicians under K.A.R. 28-35-600 through 28-35-608, to ANSI/AARST SGM-SF-2023, the consensus standard for existing homes. The Kansas Radon Program at KDHE oversees radon program compliance for Shawnee, and Kansas requires KDHE certification for radon measurement and mitigation technicians (K.S.A. 48-16a01 et seq.), verifiable on the KDHE certified-professionals map.
- County
- Johnson, KS
- Geology
- Pennsylvanian black shale and limestone, residual red clay
- EPA action level
- 4.0 pCi/L on long-term average
- Service category
- Mitigation